UV Active Surfboard Filler Resin - 250ml
The Hi-Lite Filler (Hot Coat) Resin has been Formula with Shapers Sunbake UV Additive. This allows the resin to curved with Sun UV rays (light) and does not require MKEP Catalyst.
Shapers SunBake UV Solar Additive is a curing agent that uses for UV catalysing (hardening) of the resin.
Please ensure when repairing or laminating a surfboard you keep the resin AWAY FROM DIRECT SUN LIGHT as this will cause rapid hardening of resin.
NOTES FOR USE:
Please beware resin will cure within minutes when exposed to sunlight.
Example of curing times by sunlight:
Bright Sun: Gel 15 Seconds / Full cure 5 minutes.
Partial Sun: Gel 30 Seconds / Full cure 6-8 minutes. Bright Sun: Gel 45-60 Seconds / Full cure 10 minutes. -
Work only indoor or isolated area out of sunlight. - Always test small sample of resin in sun before use. - If repair depth is over 1/4”, you will need to add MEKP to the resin at 1% to catalyse. MEKP Catalyst (Methyl ethyl ketone peroxide). Curing time with MEKP for a depth of 1/4” should curve within 15-30.
Shapers warranty on all Polyester Resin is 3months from date of purchase.
