Sanding Pads

Made for surfboard manufacturing. The pads are manufactured from high quality, long lasting material used for both foam & fiberglass sanding and therefore ideal for Surfboard Shaping. These Pads have become the industry standard. The 4.5" Pads a…

Made for surfboard manufacturing. The pads are manufactured from high quality, long lasting material used for both foam & fiberglass sanding and therefore ideal for Surfboard Shaping. These Pads have become the industry standard. The 4.5" Pads a…

6" Soft Sanding Pad - Straight edge - Very functional for rail sanding Ideal for rolling off decks, excellent to sand curves (such as shaping or sanding rail), round areas and concaves without leaving swirls (and minimises hitting the weave) and allo…

Foam Hand Sanding Pad For Velcro 6"Discs  Practical for all aspects of board building Fits Velcro 150mm (6 Inch) Discs 6" Sanding Face for faster sanding Great for sanding down high spots or lumps between laminating and filler stages. An.…

Fine Finishing block Round- 230mm x 230mm x 50mm- Multi direction finishing- Added longevity to sandpaper- Maximum comfort- Designed in conjunction with master shaper, Stuart Darcy @darcysurfboards.- Custom made for surfboard manufacturing using the.…

Ideal for attaching to 150 mm back up pad The pad has 10 mm of Soft Sponge Foam which produces a soft back up pad for fine sanding. The pad has a Loop base to attach to your Hook and Loop back up pad and a Hook and Loop face to attach your Hook and L…

Foam Hand Sanding Pad For Velcro 6"Discs  Practical for all aspects of board building Fits Velcro 150mm (6 Inch) Discs Great for sanding down high spots or lumps between laminating and filler stages. An absolute winner for wet and dry sand…

The 8" Pads are used for sanding Shortboards, Longboards and Stand Up Paddle Boads.  The pads come with either a 14mm thread (which is used in Australia and majority around the world) and 5/8" thread (which is used predominately in the American…

The 7" Pads are used for sanding rails, the board (shortboards, small shapes and longbaords). The 7" Pads have become the most commonly used size pad in the surfboard manufacturing industry, this is because the 7" pad does not wobble (such as the 8" …

The 6" Pads are used for sanding rails, the board (shortboards and small shapes), between the fins and tight areas. The pads come with either a 14mm thread (which is used in Australia and majority around the world) and 5/8" thread (which is used...

Shapers Back Up Pads are custom made for surfboard manufacturing. The pads are manufactured from high quality, long lasting material used for both foam & fiberglass sanding and therefore ideal for Surfboard Shaping. These Pads have become the...