Resin Additives

QCells is used as a gap filler, thickener agent for polyester and epoxy resin or strengthens (re-enforces) fin plug installation.

Size: 100mls MEKP is a Catalyst which is used to cure (harden) polyester resin (PE). MEKP is generally mixed at 0.5 - 1.5% ratio. Depending on desired curing speed and environmental fact

Size: 50mls MEKP is a Catalyst which is used to cure (harden) polyester resin (PE). MEKP is generally mixed at 0.5 - 1.5% ratio. Depending on desired curing speed and environmental facto

Transparent Multi Mix Measuring Bucket Features - Internal measurements for easy pouring- 2-1

Milled Fibres - Fiberglass cloth is finely milled or ground into a powder form, providing enhanced strength and bonding capabilities. - Its waterproof nature makes it a reliable choice for installing...

CAB-O-SIL Fumed Silica stands as ultra light white powder. It finds practical use in several key applications, such as:- Securing fin boxes with precision - Enhancing the viscosity of epoxy tints -...

SHA

Size: 30mls Styrene Monomer is commonly used to thin polyester resin viscosity or used with Wax in Styrene to make a Gloss Coat. Thinning the resin viscosity is a technique used in cooler climates...

SIZE: 30mls Wax in Styrene 30mls size is to be used in 1L of Polyester Laminating Resin, to convert into Fi

Wax in Styrene is a mixture of Paraffin Wax dissolved in Styrene, that is used to form an air-tight layer on the resins surface to make Filler or Gloss Coats. 

Wax in Styrene is a mixture of Paraffin Wax dissolved in Styrene, that is used to form an air-tight layer on the resins surface to make Filler or Gloss Coats. 

Styrene Monomer is commonly used to thin polyester resin viscosity or used with Wax in Styrene to make a Gloss Coat. Thinning the resin viscosity is a technique used in cooler climates or for faster...

Sunbake® is UV Activated Catalyst. Pack Size Convertor - 225kgSunbake® is

Sunbake® is UV Activated Catalyst.Sunbake® is a technologically advanced catalyst activated by Ultraviolet Light (UV). Specifically formulated for tough, bright polyester SURFBOARD laminating...

Sunbake® is UV Activated Catalyst.Sunbake® is a technologically advanced catalyst activated by Ultraviolet Light (UV). Specifically formulated for tough, bright polyester SURFBOARD laminating...

Wax in Styrene is a mixture of Paraffin Wax dissolved in Styrene, that is used to form an air-tight layer on the resins surface to make Filler or Gloss Coats. 

Size: 200mls MEKP is a Catalyst which is used to cure (harden) polyester resin (PE). MEKP is generally mixed at 0.5 - 1.5% ratio. Depending on desired curing speed and environmental fact

Microspheres 413 is an equal substitute to QCells. Used as a gap filler, thickener agent for polyester and epoxy resin or strengthens (re-enforces) fin plug installation. Usage Guidelines:<

The 411 Microsphere Blend is a low density filler used as a thickening agent with Epoxy Resin to create a lightweight filling putty that is used to seal the blank in preparation of glassing. Provided...

Sunbake® is UV Activated Catalyst.Sunbake® is a technologically advanced catalyst activated by Ultraviolet Light (UV). Specifically formulated for tough, bright polyester SURFBOARD laminating...

Styrene Monomer is the industry recommended thinning agent for polyester resin and gel coats. The addition of styrene monomer can reduce physical properties and effect cure times.  

Wax in Styrene is a mixture of Paraffin Wax dissolved in Styrene, that is used to form an air-tight layer on the resins surface to make Filler or Gloss Coats.