Deck & Tow Plugs

Shapers 3 Hole Tow Plugs. This system is designed to to be installed prior laminating, making them one of the strongest tow plug options. The plugs are molded with three holes for easy of tapping screws for tow straps.

Shapers 5 Hole Tow Plugs. This system is designed to to be installed prior laminating, making them one of the strongest tow plug options. The plugs are molded with five holes for easy of tapping screws for tow straps. The five holes allows the abili…

Shapers 2 Hole Tow Plugs (For Tow Surfing) System is easy to install and has a great bond with resin to ensure the plugs do not pull out in big surf. The plugs are moulded with two holes for easy of tapping screws for tow straps.

Shapers Medium Deck Plug is designed to be install after the Filer/Hot Coat. The hole for the leash rope is deep and easy to manage whilst maintaining an overall small and compact plug that looks the goods. Note the rod used is metal which.…

Shapers Glass In Leash Plugs are designed with a cap which allows manufactures to install the leash plug prior lamination or after glassing. The cap sands off during the final sanding process. Available colours: Black, White, Blue, Orange, Green,.…

Shapers Leash Plug with Colour Cap are design with a colour cap, that is to be inserted after the plugs has been installed. The Cap has several arms that slot, lock and hold the cap in place. Composite blend with 50% Glass Fibre New Design With R…

Holesaw for Shapers Large Deck Plugs (35mm Cutter). The holesaw is a fast efficient and effective of preparing the plugs for installation. The Sawtooth rimmed bits are best suited for foam as the tooth bit does not burn or melt the foam, but rather c…

Holesaw for Shapers Shortboard Deck Plugs (28mm). The holesaw is a fast efficient and effective of preparing the plugs for installation. The Sawtooth rimmed bits are best suited for foam as the tooth bit does not burn or melt the foam, but rather cut…

Shapers SUP Handle Grips: Shapers custom made SUP Finger Grip Handles Strong plastic and great bond to Polyester and Epoxy Resin Perfect depth for finger grip Designed to be glassed in, just as a deck plug  For installing the handle use t…

Shapers Five (5) Hole Tow Plugs (For Tow Surfing) System is easy to install and has a great bond with resin to ensure the plugs do not pull out in big surf. The plugs are moulded with two holes for easy of tapping screws for tow straps. The Five (5).…

Shapers Large Deck Plug is designed to be install after the Filer/Hot Coat. The hole for the leash rope is deep and easy to manage whilst maintaining an overall small and compact plug that looks the goods. Note the rod used is metal which..…

Designed and made in Australia by Shapers Australia. These deck plugs are by far our best seller due to a neat and tidy appearance. The hole for the leash rope is deep and easy to manage whilst maintaining an overall small and compact plug …

Shapers custom Base "for GORE™ Protective Vent) for easy installation. No more taping the surfboard, just rout out a hole and drop in the base that is pre-tapped for your convenience. *Please note: BASE ONLY The Diameter of the base member is…

GORE™ Protective Vents + Shapers custom Base: for easy installation. Shapers is GORE™ exclusive distributor to the surf craft industry. No more taping the surfboard, just rout out a hole and drop in the base that is pre-tapped for your.…

GORE™ Protective Vents allows EPS Core Surfboards to pass air back and forth between the core and the exterior of the board while preventing water from entering. This is due because EPS surfboard materials are affected by extreme temperatu…